How to connect your APEX EV charger to Wi-Fi using the APEX EV app

In this guide...

We'll show you how to set up your Project EV APEX Charger with the free APEX EV app. This should be done as part of your installer's commissioning process and helps to validate your warranty. However, if your Wi-Fi has dropped out or has not been connected, please follow the instructions below:

First of all, follow the "How to register on the APEX EV app" guide

Then:

1. Turn on your device's Bluetooth settings
2. Enable the “allow new connections” option
3. Enter the charger serial number or scan the QR code
4. Your charger should then show in “local device”
5. Click on the unit
6. Click on the burger menu in the top right
7. Go to Network
8. Click on the WiFi tab
9. Insert your Wi-Fi name in the SSID section
10. Insert your Wi-Fi password in the Password section
11. Click Setting, your charger will then reboot
12. Your charger will now show in Cloud Device and has been successfully connected to your Wi-Fi

Still Stuck?  

FOR FURTHER SUPPORT ON A WIDE RANGE OF FUNCTIONS, PLEASE VISIT Project EV - YouTube

If you are still having trouble following our guide, then please get in touch by either submitting a ticket here or give us a call on 0333 733 0333. We'll be happy to help.