Phil Duffy
Articles
-
My Project EV charger is not working and there are no lights on the unit
Frequently Asked Question... My Project EV charger is not working and there are no lights on the unit Answer: Check that the circuit breaker at the consumer unit is in the on position. If the ...
-
My Project EV app is showing my charger as “Preparing”
Frequently Asked Question... My Project EV app is showing my charger as “Preparing” Answer: Press “Start” on the app or use RFID card to start a charging session. If the charger does not start...
-
How to commission your charger using a laptop
In this guide... We'll show you how to set up your laptop to configure the Project EV Charger.Please see the video below: Prefer written instructions? Use our step by step guide below if you need...
-
How To: Connect my charger to Wi-Fi using the ProjectEV+ app
In this guide... We'll walk you through how to register and connect your EV charger to the Project EV+ app via Wi-Fi, including both automatic and manual connection metho...
-
HOW TO Update my charger to the latest firmware
Ensure there is nothing plugged into the charger Select settings at the bottom left Select firmware upgrade Ensure the firmware is available to upgrade, and select ‘upgrade firmware’ Your charger m...
-
HOW TO Remove the “off-peak” limits off my charger
Select settings at the bottom left Select off-peak regulations Select the toggle next to enable to switch it off
-
HOW TO: Add an additional user to my charger
To add an additional user, select settings at the bottom left Select authorisation Press the + button at the bottom right Enter the user’s email address they have used to set up their own Project E...
-
How To Change the charging speed of my charger
Select settings at the bottom left Select charger settings Select maximum output current Enter your desired amount of the charger’s limit or less Press ok, and the change will be saved
-
How To: Connect my charger to 4G using the ProjectEV+ app
In this guide... We'll walk you through how to connect your EV charger to the Project EV+ app using a 4G module, which requires an electrician or installer to fit the 4G hardware and SIM card ...
-
How To: Connect my charger to 4G using the ProjectEV+ app
In this guide... We'll walk you through how to connect your EV charger to the Project EV+ app using a 4G module, which requires an electrician or installer to fit the 4G hardware and SIM card ...